family.nrg

The combustion chamber of a room-sealed pellet stove is completely airtight. In addition, room-sealed wodtke pellet stoves have a tightly closing (TYPE CC) firebox door. In a pellet stove that operates independently of the ambient air, the oxygen required is not supplied from the room in which it is installed, but via a combustion air supply connected to the outside or via an exhaust air chimney. A pellet stove tested for room-sealed operation in accordance with EN 16510 is therefore ideal for installation in very airtight buildings, such as low-energy or passive houses, in combination with a controlled residential ventilation/ventilation system.

Of course, all room-sealed pellet stoves and wood-burning stoves from wodtke can also be operated in a room-sealed manner, i.e., without an external air supply.

In any case, you should involve your local district chimney sweep (building inspector for combustion appliances) at an early stage of your planning. Information on whether your desired stove has been tested and approved for room-sealed operation according to EN 16510 can be found in the operating manual of the respective model.

• Patented, extra safe combustion technology
• Microprocessor controlled fuel and combustion air quantities are adjusted perfectly to one another for the most effective combustion performance available
• Up to 40 h burn time on a single filling
• Comfortable operation on the stove or through an external thermostat
• Very quiet operation
• Easy cleaning with sliding cast-iron grate
• Large ash pan
• Child-safe door lock
• Adjustable height feet
• Connection for external pellet loader at rear (optional)

Adjustment range 2 - 5, 2 - 6 or 2 - 8 kW
Spatial heating capacity: min. 40 m² / max. 160 m²
Optimised to burn wood pellets
Rear flue tube connection Ø 100 mm

Width 41 cm, depth 44 cm, height 120 cm

> Dimensional drawing

• 2nd Level of 1st BImSchV (German Federal Emission Protection Ordinance) fulfilled
• Nominal thermal output 5, 6 oder 8 kW
• Spatial heating capacity of 40 m² to 160 m² (min./max. output) at a demand of 50 Watt/m²
• Fuel: wood pellets with ash content < 0,7%
• CO content in exhaust air < 0,02 %-Vol.
   
• 5kW
  Exhaust gas temperature 104°C - 174°C
  Exhaust gas mass flow 3,0 - 4,2 g/s
   
• 6kW
  Exhaust gas temperature 104°C - 189°C
  Exhaust gas mass flow 3,0 - 4,7 g/s
   
• 8kW
  Exhaust gas temperature 104°C - 200°C
  Exhaust gas mass flow 3,0 - 5,4 g/s
   
• Required supply pressure (chimney draught) 12 PA
• Multiple exploitation possible with safety device
• Tested in accordance with EN 16510-2-6
• Room air-independent operation possible (Type CC, tested and approved according to EN 16510)
• Reserve container for approx. 20 kg pellets
• E-power intake < 50 W
• Short-term E-ignition 250 W
• Weight 134 - 137 kg respectively

• Manual