ivo.smart water+
Conforms in technical terms to our premium pellet stove ivo.tec. ivo.tec is test winner in the Stiftung Warentest (German foundation for product testing) consumer survey 11/2011 of 19 wood-burning and pellet stoves with best mark GOOD (1.8) - together with another furnace.
Pellet stove with integrated water heat exchanger and very high efficiency (over 90%). 80% (S5: 90%) of the heat is fed into the heating circuit from a buffer storage system. Stored energy can be released from the buffer at any time and as needed. 20% of the nominal thermal output is radiated directly into the room. This means the stove can also be used in low-energy or passive houses.
This pellet stove has been granted a General Construction Authority Certification for room-air-independent operation by the DIBt (German Institute for Building Technology).
For room-air-independent operation, the combustion air supply must use a duct leading outdoors or be connected to an exhaust air flue.
This stove is ideally suited for installation in highly insulated buildings, such as low-energy or passive houses, in combination with a controlled home ventilation system.
Of course, this pellet stove can also be operated using a balanced flue, which does not require air supplied from outdoors.
- Available with front glasses in black or in white
- Patented, extra safe combustion technology
- Microprocessor controlled fuel and combustion air quantities are adjusted perfectly to one another for the most effective combustion performance available
- Up to 57 h run time on a single filling
- Reserve container with innovative sliding lid on rollers and folding cover for approx. 40kg pellets
- Extremely high water percentage, up to approx. 90% of power from water at nominal thermal output
- Integrated flow temperature limitation (85°C)
- Stainless steel burner pot and swivelling grate
- Automatic burner pot cleaning with swivelling grate and large ash pan, cleaning required only after approx. 500 kg pellet usage
- Comfortable operation on the stove or through an external thermostat
- Very quiet operation
- Connection for external pellet loader (optional)
- 8 rollers for easy handling and adjusting feet for stable base and height adjustment
- Glass door visibility screen for reduced thermal radiation - standard accessory
Adjustment range 3 – 8 kW, 3 – 9 kW oder 3 – 13 kW
Spatial heating capacity: min. 60 m² / max. 260 m²
Rear flue tube connection Ø 100 mm
Width 55 cm, depth 66 cm, height 121 cm
- 2nd Level of 1st BImSchV (German Federal Emission Protection Ordinance) fulfilled
- Nominal thermal output 8, 9 or 13 kW
- Spatial heating capacity of 60 m² to 260 m² (min./max. output) at a demand of 50 Watt/m²
- Fuel: wood pellets with ash content < 0,7%
- CO content in exhaust air < 0,02 %-Vol.
- 8kW
Exhaust gas temperature 60°C - 62°C
Exhaust gas mass flow 3,8 - 5,3 g/s
Required supply pressure (chimney draught) 2 PA - 9kW
Exhaust gas temperature 60°C - 90°C
Exhaust gas mass flow 3,8 - 7,5 g/s
Required supply pressure (chimney draught) 2 PA - 13kW
Exhaust gas temperature 60°C - 105°C
Exhaust gas mass flow 3,8 - 9,7 g/s
Required supply pressure (chimney draught) 3 PA - Multiple exploitation possible with safety device
- Tested in accordance with EN 14785, DIN 18894 and Art. 15a B-VG
- General Construction Certification Z-43.11-193
- Reserve container for approx. 40 kg pellets
- E-power intake < 50 W
- Short-term E-ignition 250 W
- Weight 262 kg
