ixbase
Clear shapes, natural materials
The combustion chamber of a room-sealed pellet stove is completely airtight. In addition, room-sealed wodtke pellet stoves have a tightly closing (TYPE CC) firebox door. In a pellet stove that operates independently of the ambient air, the oxygen required is not supplied from the room in which it is installed, but via a combustion air supply connected to the outside or via an exhaust air chimney. A pellet stove tested for room-sealed operation in accordance with EN 16510 is therefore ideal for installation in very airtight buildings, such as low-energy or passive houses, in combination with a controlled residential ventilation/ventilation system.
Of course, all room-sealed pellet stoves and wood-burning stoves from wodtke can also be operated in a room-sealed manner, i.e., without an external air supply.
In any case, you should involve your local district chimney sweep (building inspector for combustion appliances) at an early stage of your planning. Information on whether your desired stove has been tested and approved for room-sealed operation according to EN 16510 can be found in the operating manual of the respective model.
With the my.wodtke app for iOS and Android, you can experience a whole new dimension of heating comfort, as it allows you to conveniently control the wodtke ix.iQ® and wodtke ixbase pellet stoves with air ducts, as well as the wodtke shogun.
Operations are identical to those on your normal ixbase operating board. Thanks to an intuitive menu structure, the controls are especially easy to handle. For example, you can complete the following operational and monitoring functions:
- Change your set target temperature.
- Easily and quickly switch between automatic heating programmes (three weekly programs, comfort, lower, frost protection, party, vacation) and manual operating mode.
- Conveniently and intuitively change the activation times for your heating programmes.
- Display current maintenance and fault messages for monitoring purposes.
- wodtke eReserve, operates up to 24 hours during a power outage (optional)
- Convenient operation on stove through touch display
- wodtke smart home fire and wodtke remote portal: Control worldwide through the internet or the FireTouch app
- Language selection: German, English, French
- Integrated room and timer-controlled thermostat with solar-operated room temperature sensor
- Acoustic alarm in case of faults or interrupted operation (switches on or off)
- Black glass, white glass, sandstone or soapstone cladding available
- Decorative slatted convection air vent
- Patented, extra safe combustion technology
- Microprocessor controlled fuel and combustion air quantities are adjusted perfectly to one another for the most effective combustion performance available
- Up to 90 h burn time on a single filling
- Automatic burner pot cleaning with swivelling grate and large ash pan, cleaning required only after approx. 500 kg pellet usage
- Automatic detection of the fuel quantity
- Very quiet operation
- Child-safe door lock
- Can be installed directly on the wall
- Connection for optional external pellet loader (rear)
- Horizontal (rear or side) or vertical (top) flue tube connection available
Adjustment range 2 – 5 kW or 2 – 6 kW
Spatial heating capacity: min. 40 m² / max. 120 m²
Horizontal (rear or side) or vertical (top) flue tube connection Ø 100 mm available
Width 91 cm, depth 51 cm, height 114 cm
- 2nd Level of 1st BImSchV (German Federal Emission Protection Ordinance) fulfilled
- Nominal thermal output 5 or 6 kW
- Spatial heating capacity of 40 m² to 120 m² (min./max. output) at a demand of 50 Watt/m²
- Fuel: wood pellets with ash content < 0,7%
- CO content in exhaust air < 0,02 %-Vol.
- Exhaust gas temperature 68°C - 156°C (167°C at 6 kW)
- Exhaust gas mass flow 2,4 - 4,4 g/s (4,6 g/s at 6 kW)
- Required supply pressure (chimney draught) 12 PA
- Multiple exploitation possible with safety device
- Tested in accordance with EN 16510-2-6
- Room air-independent operation possible (Type CC, tested and approved according to EN 16510)
- Reserve container for approx. 45 kg pellets
- E-power intake < 50 W
- Short-term E-ignition 250 W
- Weight with eReserve 278-314 kg
- Weight without eReserve 243-278 kg
