PE Nova water+ Insert Stove
Fire place and heat source in the center of the house
Pellet stove with integrated water heat exchanger and very high efficiency (over 90%). 80% (S5: 90%) of the heat is fed into the heating circuit from a buffer storage system. Stored energy can be released from the buffer at any time and as needed. 20% of the nominal thermal output is radiated directly into the room. This means the stove can also be used in low-energy or passive houses.
- Patented, extra safe combustion technology
- Microprocessor controlled fuel and combustion air quantities are adjusted perfectly to one another for the most effective combustion performance available
- Up to 110 h burn time on a single filling
- Comfortable operation on the stove or through an external thermostat
- Integrated flow temperature limiter (75°C)
- 4 ball-bearing mounted rollers with locking brake for easy, convenient set-up
- Quiet operation
- Child-safe door lock
- Connection for external pellet loader (optional)
Adjustment range 2 - 8 or 2 - 10 kW
Spatial heating capacity: min. 40 m² / max. 200 m²
Rear flue tube connection Ø 100 mm
With the my.wodtke app for iOS and Android, you can experience a whole new dimension of heating comfort, as it allows you to conveniently control the wodtke ix.iQ® and wodtke ixbase pellet stoves with air ducts, as well as the wodtke shogun.
Operations are identical to those on your normal ixbase operating board. Thanks to an intuitive menu structure, the controls are especially easy to handle. For example, you can complete the following operational and monitoring functions:
- Change your set target temperature.
- Easily and quickly switch between automatic heating programmes (three weekly programs, comfort, lower, frost protection, party, vacation) and manual operating mode.
- Conveniently and intuitively change the activation times for your heating programmes.
- Display current maintenance and fault messages for monitoring purposes.
Width 70 cm, depth 51 cm, height 124 cm
- 2nd Level of 1st BImSchV (German Federal Emission Protection Ordinance) fulfilled
- Nominal thermal output 8 or 10 kW
- Spatial heating capacity of 40 m² to 200 m² (min./max. output) at a demand of 50 Watt/m²
- Fuel: wood pellets with ash content < 0,7%
- CO content in exhaust air < 0,02 %-Vol.
- Exhaust gas temperature 55°C - 117°C (- 142°C at 10 kW)
- Exhaust gas mass flow 6 - 7,1 g/s (6,4 - 9,5 g/s at 10 kW)
- Required supply pressure (chimney draught) 12 PA
- Multiple exploitation possible with safety device
- Tested in accordance with EN 16510-2-6
- Reserve container with telescope for approx. 55 kg pellets
- E-power intake < 50 W
- Short-term E-ignition 250 W
- Weight 138 kg
