shogun

The combustion chamber of a room-sealed pellet stove is completely airtight. In addition, room-sealed wodtke pellet stoves have a tightly closing (TYPE CC) firebox door. In a pellet stove that operates independently of the ambient air, the oxygen required is not supplied from the room in which it is installed, but via a combustion air supply connected to the outside or via an exhaust air chimney. A pellet stove tested for room-sealed operation in accordance with EN 16510 is therefore ideal for installation in very airtight buildings, such as low-energy or passive houses, in combination with a controlled residential ventilation/ventilation system.

Of course, all room-sealed pellet stoves and wood-burning stoves from wodtke can also be operated in a room-sealed manner, i.e., without an external air supply.

In any case, you should involve your local district chimney sweep (building inspector for combustion appliances) at an early stage of your planning. Information on whether your desired stove has been tested and approved for room-sealed operation according to EN 16510 can be found in the operating manual of the respective model.

• New wodtke Q1 series
• Convenient operation through modern touch-display
• Detached Smart Home Controller SHC01 for room temperature measurement included
• Integrated room temperature regulation with time- and weekday-based programmes
• Manual change of target temperature and thermal output possible
• Automatic detection of fuel quantity
• Multilingual display
• my.wodtke App for iOs and Android: worldwide control through the internet via smartphone or tablet possible (optional WiFi-Module required)
• Possibility of room-air-independent installation – allows for simultaneous operation with a controlled home ventilation system.
• Patented, extra safe combustion technology with extensive electronic monitoring
• Up to 40 h burn time with just a single filling
• Extremely quiet thanks to the lack of a loud convection fan
• Easy cleaning with sliding cast-iron grate
• Large ash pan
• Child-safe door lock
• Adjustable feet height

Adjustment range 2 – 6 or 2 – 8 kW
Spatial heating capacity: min. 40 m² / max. 160 m²
Optimised to burn wood pellets

Rear flue tube connection Ø 100 mm

Width 42 cm, depth 45 cm, height 122 cm

> Dimensional drawing

• 2nd Level of 1st BImSchV (German Federal Emission Protection Ordinance) fulfilled
• Nominal thermal output 6 or 8 kW
• Spatial heating capacity of 40 m² to 160 m² (min./max. output) at a demand of 50 Watt/m²
• Fuel: wood pellets with ash content < 0,7%
• CO content in exhaust air < 0,02 %-Vol.
   
• 6kW
  Exhaust gas temperature 104°C - 196°C
  Exhaust gas mass flow 3,0 - 4,1 g/s
  Energy efficiency class*: A++
   
• 8kW
  Exhaust gas temperature 104°C - 200°C
  Exhaust gas mass flow 3,0 - 5,4 g/s
  Energy efficiency class*: A+
  
  *   Energy efficiency classes range from A++ to G
• Required supply pressure (chimney draught) 12 PA
• Multiple exploitation possible with safety device
• Tested in accordance with EN 16510-2-6
• Room air-independent operation possible (Type CC, tested and approved according to EN 16510)
• Reserve container for approx. 20 kg pellets
• E-power intake < 50 W
• Short-term E-ignition 250 W
• Weight 175 kg