Lucky
View on the flames from three sides
wodtke Air Control regulates the combustion air supply for an optimal combustion process. The system requires no valves or gates. This significantly increases operating comfort and eliminates user error. All users need to do is regularly refill the fuel supply.
Air Control thermal regulation is based on a hydraulically activated control valve connected to a temperature sensor through a capillary system. Thanks to Air Control, the right quantity of combustion air is delivered to the right area of the combustion chamber. At the beginning, when the system is still cold, the fire needs a large quantity of primary air in order to quickly start a clean combustion process. This combustion air must be fed through the grate from below. As the system heats up, the thermal oil in the temperature sensor expands, slowly closing the control valve. This process automatically closes the primary air duct. Afterwards, the combustion air is fed downwards to the flame as secondary air and as an 'air curtain' for the window. This AWS air wash system effectively delays soiling of the viewing window.
- Three viewing Windows provide a generous view of the fire, even from the sides
- Top and soapstone insert slab for warming recess
- Wood storage compartment in base
- Secondary air preheating for especially low-emission combustion
- AWS window air wash system
- High-quality, double-wall steel construction
- Combustion chamber cladding with proven Vermiculite
- Long-lasting fire grate made of solid cast iron
- Ash pan for easy ash removal
- Flue tube connection at top or rear possible
Adjustment range 3 - 6 kW
Spatial heating capacity: min. 36 m³ / max. 88 m³
Burns wood
Width 47 cm, depth 45 cm, height 121 cm
- 2nd level of 1st BlmSchV (Federal Emission Protection Ordinance) fulfilled
- Nominal thermal output 5 kW
- Spatial heating capacity of 36 m³ to 88 m³in accordance with DIN 18893
- Burns wood
- CO content in exhaust air < 0.12 % vol.
- Exhaust gas temperature 300°C
- Exhaust gas mass flow 4,5 g/s
- Required supply pressure (chimney draught) 12 PA
- Several stoves may be connected to one chimney
- Tested in accordance with EN 16510-2-1
- Flue tube connection at top or rear Ø 150 mm
- Connection for combustion air supply Ø 100 mm
- Weight 109 kg
