Wood-burning stove samurai oki
A spirit of inquiry and a passion for innovation have resulted in a product that sets the standard. The samurai iClean is characterized by exceptionally low-emission heating using wood as fuel and falls well below the limits specified in Stage 2 of the First Federal Immission Control Ordinance (1. BImSchV).
The combustion chamber of a room-sealed stove is completely airtight. In addition, room-sealed wodtke stoves are equipped with a self-closing (TYPE CA) firebox door that seals automatically. The required combustion air for a room-sealed stove is not drawn from the installation room but is instead supplied via an external combustion air supply connection or through a concentric flue system (air/flue gas chimney).
A stove tested and certified for room-sealed operation in accordance with EN 16510 is therefore ideally suited for installation in highly airtight buildings, such as low-energy or passive houses, and for use in combination with a mechanical ventilation system or controlled residential ventilation.
Of course, all room-sealed wood-burning and pellet stoves from wodtke can also be operated in a room-air-dependent mode, i.e., without an external air supply.
In any case, you should involve your local district chimney sweep (building inspector for combustion appliances) at an early stage of your planning. Information on whether your desired stove has been tested and approved for room-sealed operation according to EN 16510 can be found in the operating manual of the respective model.
wodtke Air Control regulates the combustion air supply for an optimal combustion process. The system requires no valves or gates. This significantly increases operating comfort and eliminates user error. All users need to do is regularly refill the fuel supply.
Air Control thermal regulation is based on a hydraulically activated control valve connected to a temperature sensor through a capillary system. Thanks to Air Control, the right quantity of combustion air is delivered to the right area of the combustion chamber. At the beginning, when the system is still cold, the fire needs a large quantity of primary air in order to quickly start a clean combustion process. This combustion air must be fed through the grate from below. As the system heats up, the thermal oil in the temperature sensor expands, slowly closing the control valve. This process automatically closes the primary air duct. Afterwards, the combustion air is fed downwards to the flame as secondary air and as an 'air curtain' for the window. This AWS air wash system effectively delays soiling of the viewing window.
wodtke HiClean-Filter technology works without any complex additional components. With innovative filter materials and a well-thought-out air supply, emissions and fuel consumption are effectively reduced, while the stove's efficiency and heat exchange are increased significantly.
The depth filter made of ceramic foam and positioned above the combustion chamber retains the particles generated primarily during the initial phase of combustion. After the ignition temperature is exceeded, these are burnt, leaving the filter clear after each combustion phase. The filter also retains combustion gases for a longer period of time at a significantly higher temperature in the combustion chamber, leading to noticeably better combustion.
samurai iClean oki - awarded the “Blue Angel
The “samurai iClean oki” model was one of the first stoves to be awarded the Blue Angel eco-label in conjunction with the wodtke HiClean-Filter® technology HCF 03 (utility model protected), the FireMatic Comfort combustion technology and the electrostatic separator Airjekt 1 (K+W).
- HiClean Filter® technology for particularly efficient and clean keeping
- Reactor-catalyst arrangement in tandem principle with ceramic internals and catalyst HCF03 (utility model protected, optional)
- 2nd stage of the 1st BlmSchV (Federal Emission Protection Ordinance) fulfilled
- FireMatic Comfort Burning technique optional
- Room air independent and room air dependent operation possible
- General building authority approval as room air independent stove applied for
- With integrated side heat accumulator as standard
- AWS-Window rinsing
- Flue pipe exchange socket vertical (top) Ø 150 mm - convertible to horizontal (rear)
- Particularly gentle and quiet closing door
Energy efficiency class: A/A+ (energy efficiency class in the range from A++ to G) with FireMatic Comfort burn-off technology
Burns wood
Width 46 cm, depth 46 cm, height 137 cm
- Reactor-catalyst arrangement in tandem principle with ceramic internals and catalyst HCF03 (utility model protected)
- Nominal heat output 8 kW - Energy efficiency class: A+ (energy efficiency class in the range from A++ to G)
- 2nd stage of the 1st BlmSchV (Federal Emission Protection Ordinance) fulfilled
- Tested in accordance with EN 16510-2-1
- Room air-independent operation possible (Type CA, tested and approved according to EN 16510)
- Required supply pressure (chimney draught) 12 PA
- Base with integrated central combustion air spigot Ø 100 mm
- Flue pipe exchange socket vertical (top) Ø 150 mm convertible to horizontal (rear)
